Hey everyone! Welcome to my blog. Today's topic is about how to make a home made dildo.Making a homemade dildo is actually a risky behavior. There are many hidden dangers in terms of material selection, production process, and usage safety. The blogger will comprehensively and deeply explore this topic, providing a comprehensive and detailed reference for those interested in making a homemade dildo, while also emphasizing the risks and key safety points.
Why Making Homemade Dildos Is a High-Risk Behavior？
In the attempt to make homemade dildos, fruits and vegetables have become the choice of some people due to their easy accessibility and seemingly natural characteristics. The most common one is cucumber. Some people simply put a condom on a cucumber and use it directly. However, this approach is fraught with risks. Cucumbers are relatively fragile and can easily break during use. There was once a report that a user's cucumber broke and got stuck inside during use. When the doctor removed it, he joked helplessly, "This cucumber is not even as thick as my little finger. What were you thinking?" Besides the risk of breaking, the surface of fruits and vegetables may carry pesticide residues and bacteria. Even if a condom is used, it is difficult to completely avoid infection and harm to the human body. Moreover, the pH of fruits and vegetables is different from that of the human private parts. Long-term contact may disrupt the acid-base balance and cause inflammation.
Can it be made safe by boiling in hot water for a while?
Silicone is one of the relatively better material choices for making homemade dildos, but there are also problems with disinfection. Silicone needs to be boiled for more than 10 minutes to achieve sterilization. However, the bonding parts used in the homemade process may come apart when exposed to high temperatures. Once they come apart, it not only affects the structural integrity of the dildo but also allows bacteria to enter the hard-to-clean and disinfect inner parts, thereby increasing the risk of infection. For porous materials such as wood and fabric, it is impossible to achieve thorough sterilization through conventional disinfection methods. The pores of these materials can absorb bacteria and dirt, and even after multiple washings and disinfections, there will still be residues. Using such materials to make dildos undoubtedly brings a large number of bacteria into the body, which can easily cause various diseases.
If one insists on trying, how can we reduce the risks?
When it comes to material selection, it is essential to strictly distinguish between food-grade silicone and medical-grade silicone. Food-grade silicone is mainly used in scenarios where it comes into contact with food, and its safety standards are different from those of medical-grade silicone. Medical-grade silicone needs to pass strict biocompatibility tests, such as ISO 10993 biocompatibility certification. When purchasing materials, be sure to look for this certification. You can search for "medical silicone mold-making materials" on platforms like Amazon. Only by using medical-grade silicone can the potential harm to the human body be minimized. To avoid bacterial growth and residue, materials that are smooth and integrally formed must be chosen. Porous materials such as wood, ceramics, and fabrics should be completely eliminated. These materials are not only difficult to clean and disinfect but may also produce debris during use due to wear and tear, which could cause harm when entering the body. For 3D printing resin materials, although secondary curing and alcohol cleaning can reduce chemical residues, even after these treatments, residual monomers may still irritate the human mucous membranes. Therefore, when choosing materials, it is best to avoid those that may pose a risk of chemical residue.
At the same time, we need to prepare medical-grade silicone AB glue. It can be used for bonding and shaping silicone, ensuring the stability of the structure.
Also, a vacuum degassing machine is necessary. Because during the production process, it can effectively remove air bubbles in the silicone, making the finished product smoother and more uniform. A UV disinfection box is also an essential tool. It can thoroughly disinfect the finished artificial penis to ensure safe use. If all else fails, you can choose hot melt glue, but it must be completely cooled and solidified. You can also use a toothpick to manually remove air bubbles from the silicone, but the effect is relatively poor. As an alternative to the UV disinfection box, soaking the artificial penis in 75% alcohol for 24 hours can also be used for disinfection. However, alcohol soaking cannot completely achieve sterilization.
How do we make it?
First, use sculpting oil clay to mold the prototype. The diameter of the prototype should be controlled at ≤3cm, and the length at ≤12cm. Such dimensions can not only meet the basic usage requirements but also minimize risks. During the molding process, the surface must be smooth without any sharp edges to avoid scratching the human body during use. Special attention should be paid that you must not directly mold body parts. A netizen once used a penis mold, but the silicone got stuck, and they had to call the fire department to saw open the mold to be rescued. Such dangerous behavior not only brings great pain to oneself but may also cause serious physical harm. Then mix the medical-grade silicone, thoroughly blend the A glue and B glue in a certain proportion. Then pour the mixed silicone around the prototype and wait for it to solidify. After solidification, carefully cut open the mold and take out the prototype, and you will get the silicone mold.
Remember to apply Vaseline on the inner wall of the mold. This step is very crucial. Vaseline can act as a release agent, making it easier to remove the finished artificial penis from the mold later. Then pour the liquid medical-grade silicone into the mold. During the pouring process, insert a stainless steel rod. The stainless steel rod can serve as an internal support structure to prevent the artificial penis from bending or breaking during use. Finally, after injecting the silicone, perform vacuum degassing or let it stand for 24 hours to remove air bubbles. Vacuum degassing can make the silicone more compact, reduce the presence of air bubbles, and improve the quality of the finished product; if there is no vacuum degassing machine, letting it stand for 24 hours can also allow air bubbles to naturally escape to a certain extent.
For post-processing, use sandpaper and other tools to smooth the edges to avoid scratches during use. If you need to add a vibration element, use non-irritating glue to attach it to the appropriate position. After soaking in alcohol for disinfection, seal and store the artificial penis to avoid contamination.
What are the alternatives for you?
Buy a regular small vibrator, which costs about 80 yuan. Put the vibrator over a peeled cucumber and use it. This way, you can enjoy the stimulation of vibration while avoiding direct contact with fruits and vegetables, reducing the risks that may be caused by fruits and vegetables, such as breakage and infection. Choose a smooth one-piece silicone dish brush, disinfect it strictly, and then put a condom over it for use. This modification costs less than 20 yuan. But it should be noted that it is only for external use to avoid internal structural and material issues causing harm to the body.
Do you really need to make it yourself?
The monetary cost of making a silicone artificial penis is relatively high, usually over 200 yuan. Moreover, during the production process, due to improper material use or production failure, material waste may occur. The time cost should not be ignored either. From material preparation, production to post-processing, it takes at least 3 days. The price of entry-level artificial penises on the market is relatively low, generally between 80 and 150 yuan. After purchase, you can receive it by express delivery in about 3 days. Compared with making it yourself, it not only saves time and energy but also ensures better quality and safety.
If it's for saving money, please directly purchase a basic model from a regular brand. The basic models of artificial penises from regular brands are not expensive, and they have undergone strict quality inspection and safety certification. Compared with self-made ones, they are more cost-effective, safer and more reliable.
If you are purely addicted to handicrafts, it is recommended that you switch to other projects such as resin art or wool felting. These handicrafts can also satisfy your crafting desires and do not carry the safety risks associated with making homemade sex toys.
Although making homemade sex toys may be seen as a unique exploration and experimentation in certain niche circles, there are significant risks involved in every aspect, from material selection and production techniques to usage safety. Even if you follow the strictest requirements and procedures, it is difficult to completely avoid potential safety hazards. In contrast, purchasing commercially available products that are regulated is not only safer and more convenient but also offers better quality and user experience. For those passionate about handicrafts, it is advisable to channel your creativity and energy into safer and more beneficial projects. Safety should always be the top priority on the path of sexual exploration; do not neglect potential risks due to momentary curiosity or impulse.
Conclusion
Finally, if you insist on trying, please use three condoms at once.If you have any suggestions or ideas, you can comment in the comment section or send me a private message.
